Error & Status Messages on the Display Panel
31
4
Machine Configuration
You can check the machine configuration using telnet or UNIX.
❖
❖❖
❖ telnet
Use the info command.
❖
❖❖
❖ UNIX
Use the lpr or lpstat command or stat parameter of rsh, rcp, or ftp.
Reference
For more information, see “Remote Maintenance by Telnet (mshell)”, the
Network Printing Guide provided as a PDF file on the CD-ROM labeled
“Operating Instructions”.
Note
❒ “*” (asterisk) is displayed with the current setting.
❒ Regarding *1–*5, see table below.
*** No toner. Replace Toner
Cartridge.
The indicated color toner has
almost run out.
Note
❒ “***” in the message repre-
sents the color: Black, Yel-
low, Magenta, or Cyan.
Replace the toner cartridge
with a new one.
DToner is almost empty. The toner has almost run out. Replace the toner cartridge
with a new one.
Tray ### has a problem. Turn
Main Power Switch off then
on. If the error appears again,
call service representative.
An error has occurred in the
indicated paper feed tray.
Note
❒ “###” in the message rep-
resents a paper feed tray.
Turn off the main power
switch, wait five minutes, and
on again. If the message ap-
pears again, call your sales or
service representative.
Unauthorized user access.
Print job has been cancelled.
Print job canceled due to user
restrictions.
Check the User Code permis-
sion condition.
Item Description
Input Tray
No.
Name
PaperSize
Status
ID number of the paper tray
Name of the paper tray
*1
Paper size loaded in the paper tray
*2
Current status of the paper tray
*3
Output Tray
No.
Name
Status
ID number of the output tray
Name of the output tray
*4
Current status of the output tray
*5
Messages/Second messages Description Solution
