Filter
Top Products
Setting Originals
46
3
B Place the top edge of the origi-
nal first.
When using the machine as a
network TWAIN scanner, this
orientation is the standard set-
ting in the TWAIN driver. Nor-
mally, use this orientation for
placement.
C
CC
C
Select the appropriate orientation
so that it matches the orientation
of originals placed.
Reference
⇒ p.47 “Original Orientation
and Scan Area Setting”
Placing the Divided Original in
the Automatic Document
Feeder (ADF)
When originals are placed in the
ADF, scanning finishes as one docu-
ment when the scan of all originals
are completed by factory default.
If the auto-reset time is set in [Job Re-
set Time in Adding Original], it is possible
to scan a large number of originals as
a single document by dividing the
originals into several parts, scanning
one part and then placing the nex part
within a certain amount of time and
so on.
Reference
⇒ p.27 “Job Reset Time in Adding
Original”
After the originals are scanned, the
remaining time for accepting the next
original is displayed.
When there is another original to
scan, set it within the specified time. If
set, the original is feed and scanned
automatically. If there is no more
original, press the {
{{
{#}
}}
} key.
Note
❒ Originals are scanned in order.
Place them from the first page.
❒ Press the {
{{
{Start}
}}
} key to restart
when a countdown is stopped.
ZHFY080N