Filter
Top Products
Faxing
16
2
❒ When sending an original of irreg-
ular (i.e. custom) size or part of a
large original, you can specify the
scan area precisely. See p.18 “Set-
ting a Scan Area”.
❒
Custom size documents are scanned
as regular size documents, so the re-
ceiver may find extra blank margins
or edges of images missing. If you
specify a scan area, only that area
will be scanned regardless of actual
document size.
❒ Make sure that all ink, correcting
fluid etc., has completely dried be-
fore placing your original. If it is
still wet, the exposure glass will be
marked and those marks will ap-
pear on the received image.
❒ If you place an A4 or LT (8
1
/
2
"×11")
size original in the portrait orienta-
tion, the machine rotates the image
by 90 degrees before sending. See
p.79 “Transmission with Image
Rotation”, Facsimile Reference <Ad-
vanced Features> .
❒ You can send the first pages from
the exposure glass then the re-
maining pages from the ADF. Af-
ter you have removed the last page
from the exposure glass, insert the
remaining pages in the ADF, and
then press the {
{{
{Start}
}}
} key.
❒ When using the Internet Fax func-
tion, documents transmitted are
sent at A4 width. Documents larger
than A4 are reduced to A4 width.
Reference
For how to place two-sided docu-
ments, see p.62 “Two-Sided
Transmission (Double-Sided
Transmission)”, Facsimile Reference
<Advanced Features> .
For acceptable types of originals,
see p.204 “Acceptable Types of
Originals”, Facsimile Reference <Ad-
vanced Features> .
Placing a Single Original on
the Exposure Glass
Place originals that cannot be placed
in the optional ADF, such as a book,
on the exposure glass one page at a
time.
A
AA
A
Lift the exposure glass cover or
the ADF by at least 30 degrees.
Note
❒ If you do not lift the ADF by at
least 30 degrees, the original
size will not be detected.
B
BB
B
Place the original face down and
align its upper left corner with the
reference mark at the upper left
corner of the exposure glass.
1.
Positioning mark
2.
Scale
C
CC
C
Lower the ADF.
Note
❒ When setting a bound original,
the received image may contain
some black areas. To reduce this
effect, hold down the original to
prevent the bound part from
rising.
RussianC3Fax-combine-EN_F_FM.book Page 16 Thursday, July 3, 2003 7:15 PM