Filter
Top Products
Basic Procedure
21
2
Auto Start
If you press the {
{{
{Start}
}}
} key during the warm-up period, the {
{{
{Start}
}}
} key will blink
and your copies will be made as soon as warm-up finishes.
A
AA
A
Make any adjustments to copy settings during the warm-up period.
B
BB
B
Place originals.
C
CC
C
Press the {
{{
{Start}
}}
} key.
Copying Starts automatically when the {
{{
{Start}
}}
} key indicator flashes red and
green indicating copy-readiness.
Interrupt Copy
Use this function to interrupt a long copy job to make urgently needed copies.
Note
❒ The procedure for making interrupt copies depends on the kind of operation
the machine is currently carrying out.
❒ You can use Document Server mode during Interrupt Copy.
❒ The previous copy job settings will be restored and the machine will continue
copying from where it left off.
A
AA
A
Press the {
{{
{Interrupt}
}}
} key.
When the machine stops scanning
A Remove copied originals and place originals you want to copy.
B Press the {
{{
{Start}
}}
} key.
The machine starts making copies.
C When the copy job is finished, remove originals and copies.
D Press the {
{{
{Interrupt}
}}
} key again.
The Interrupt indicator goes out.
E When the display prompts you, place the remaining originals again be-
fore interrupting.
F Press the {
{{
{Start}
}}
} key.
When the machine continues copying
A Place the originals you want to copy.
B Press the {
{{
{Start}
}}
} key.
The machine stops the other job and starts copying the new original.