Filter
Top Products
Settings You Can Change with the User Tools
7
1
Settings You Can Change with the User
Tools
Reference
For how to access the User Tools, see
⇒
P.4 “Accessing the User Tools (System
Settings)”.
Basic Page 1
Menu Description
Operation Panel Beeper The beeper (key tone) sounds when a key is pressed.
This beeper can be turned on or off.
Note
❒
Default: On
Ready Operation Panel
Beeper
Specify whether to sound the beeper when the machine be-
comes ready for copying immediately after Energy Saver
mode is deactivated or the power is turned on.
Note
❒
If the “Operation Panel Beeper” setting is “Off”, the
beeper does not sound irrespective of the “Ready Opera-
tion Panel Beeper” setting.
❒
Default: On
Copy Count Display The copy counter can be set to show the number of copies
made (count up) or the number of copies remaining to be
made (count down).
Note
❒
Default: Up (count up)
Auto Response (Hu-
man) Sensor
If the machine does not detect anyone using it for a certain
period of time, it will switch automatically to one of the reset
modes – Auto Reset, System Reset, Energy Saver mode, Low
Power mode or Auto Off. You can cancel this setting.
If “Low Power Timer” is set to “0”, “Auto Response (Hu-
man) Sensor” is disabled.
Note
❒
Default: Yes (On)
Reference
See “Low Power Timer” in
⇒
P.7 “Basic Page 1”.