Filter
Top Products
User Tools (System Settings)
10
1
Basic Page 2
ADF Orig. Ejection As a default setting, the scanned originals from the docu-
ment feeder are ejected to the ADF external tray. If there is
no space to attach an ADF external tray, you can change the
output tray to the ADF tray. However, if the output tray is
set to the ADF tray, it takes a little more time than to the
ADF external tray.
Note
❒
Default: ADF Ext. Tray
❒
Even if the ADF external tray is set, papers are ejected to
the ADF tray in 2 Sided
→
2 Sided copy mode.
<F/F4>Size Setting
Currently three types of F size are available; 8
1
/
2
"
×
13", 8
1
/
4
"
×
13" and 8"
×
13".
The document feeder or platen cover sensor cannot distin-
guish these 3 types of originals.
This function sets the F size from the document feeder or
platen cover sensor.
Auto Paper Select or Auto Reduce/Enlarge can be used for
F size originals based on this setting.
Note
❒
Default: 8
1
/
2
"
×
13"
L
Menu Description
System Reset If no operation is performed for a selected time after inter-
rupt copying, the interrupt copying will be canceled. This
function is called “System Reset”. The time can be set from
10 to 999 seconds, or 0.
Note
❒
Default: 60sec.
❒
When the time is set to “0”, System Reset will not be ac-
tivated.
Function Priority You can specify the mode that is displayed when the opera-
tion switch is turned on or System Reset is activated.
Note
❒
Default: Copy
Menu Description