Filter
Top Products
User Tools (System Settings)
12
1
Set Time
When entering Set Time mode, if a key operator code has already been set, you
must enter the code (up to 8 digits).
Reference
See “Key Operator Code” in
⇒
P.17 “Count Manager”.
Menu Description
Set Date Set the date for the copier's internal clock.
Note
❒
You need to set this for the weekly timer to work proper-
ly.
Set Time Set the time for the copier's internal clock.
Note
❒
Enter the time using the 24-hour clock (1 second steps).
❒
You need to set this for the weekly timer to work proper-
ly.
Weekly Timer:Monday
Weekly Timer:Tuesday
Weekly Timer:Wednes-
day
Weekly Timer:Thurs-
day
Weekly Timer:Friday
Weekly Timer:Saturday
Weekly Timer:Sunday
Set the time when you want the machine to turn itself on/
off for each day of the week.
Important
❒
The timers do not work if the main power switch is
turned off or the power cord is unplugged.
❒
To keep the power on throughout the day, clear both the
“On Set Time” and “Off Set Time” settings.
Note
❒
Enter the time using the 24-hour clock (1 minute steps).
Key Operator Code for
Off Setting
Set a key operator code (up to 8 digits) to temporarily cancel
the power off setting of the weekly timer.
Note
❒
When the weekly timers are set and the operation switch
is off, you can still use the machine by doing one of the
following:
• If the key operator code is set, turn on the operation
switch and enter the code.
• If the key operator code is not set, just turn on the op-
eration switch.