Filter
Top Products
Advanced Configuration Features
150
890USE17700 April 2004
STB NIP 2212 Configurable Parameters
Introduction The following information describes how to the configure parameters for the
STB NIP 2212 using the Advantys configuration software.
The following operating parameters are user configurable:
data size (in words) of PLC output data transmitted to the HMI panel and HMI
input data sent to the PLC
maximum node ID for the last module assembled on the island bus, including
CANopen devices
General
Information
For general information about the NIM module (model name, version number,
vendor code, etc.), do the following:
Accessing
Configurable
Parameters
To access the configurable parameters for the STB NIP 2212:
Step Action Comment
1 Open your island configuration with the
Advantys configuration software.
The STB NIP 2212 is the leftmost module
in your island bus assembly.
2 Double-click on the NIM in the island
editor.
The module editor window appears.
3 Select the General tab. General information about the
STB NIP 2212 is available from this tab.
Step Action Comment
1 Double-click on the STB NIP 2212 in
the island editor.
The module editor window appears.
2 Select the Parameters tab. Configurable parameters are located
under this tab.
3 In the Parameter name column,
expand the Additional Info Store List by
clicking on the plus (+) sign.
The configurable parameters are
displayed.