Filter
Top Products
53UPS Network Management Card 2 User’s Guide
APC-Service-Type = Admin
• Add user names and attributes to the RADIUS “user” file, and verify the password against /etc/passwd.
The following example is for users
bconners and thawk:
bconners Auth-Type = System
APC-Service-Type = Admin
thawk Auth-Type = System
APC-Service-Type = Device
Supported RADIUS servers
FreeRADIUS and Microsoft IAS 2003 are supported. Other commonly available RADIUS applications may
work but have not been fully tested.
Inactivity Timeout
Path: Administration > Security > Auto Log Off
Use this option to configure the time (3 minutes by default) that this user interface waits before logging off an
inactive user. If you change this value, you must log off for the change to take effect.
This timer continues to run if you close the browser window without first logging off (by clicking
Log Off at the upper right). In that circumstance, no one else can log on until the time specified as
Minutes of Inactivity expires.
For example, with Minutes of Inactivity at 10 minutes, if you close the browser window without
logging off, no one else can log on for 10 minutes.