Filter
Top Products
33KVM Switches KVM0108A and KVM0116A User Manual
Troubleshooting
Overview
Operation problems can be due to a variety of causes. The first step in solving them is to make sure that
all cables are securely attached and seated completely in their sockets.
In addition, updating the product's firmware may solve problems that have been discovered and resolved
since the prior version was released. If your product is not running the latest firmware version, we
strongly recommend that you upgrade (see “Firmware Upgrade Utility” on page 29).
OSD Factory Default Settings
Symptom Action
Mouse and/or Keyboard not
responding
Unplug the cable from the console port, then plug it back in.
All Station IDs display as 01 Station 1 suddenly lost power. Wait a few seconds for the system to
re-initialize the station sequence and display the proper IDs.
• Perform a reset on station ID (see “Reset Station IDs” on page 19).
• Unplug the chaining cable, then plug it back in.
Setting Default
OSD Hotkey
[SCROLL LOCK] [SCROLL LOCK]
Port ID Display Position Upper Left Corner
Port ID Display Duration 3 Seconds
Port ID Display Mode The Port Number plus the Port Name
Scan Duration 5 Seconds
Scan/Skip Mode All
Screen Blanker OFF
Hotkey Command Mode ON
Hotkey
[NUM LOCK] + [-]
Logout Timeout OFF
Beeper ON
Accessible Ports F (Full Access) For all Users on all Ports
Operation Mode Share
OSD Language English