Filter
Top Products
CHEETAH 15K.7 FC PRODUCT MANUAL, REV. E 46
11.3 SCSI COMMANDS SUPPORTED
Table 16 lists the SCSI commands supported by Cheetah 15K.7 FC drives.
Table 16 Supported commands
Command
code
Supported
(Y/N) [4] Command name
Executable state of standard SCSI commands in the presence of
LBA banding (applies to SED models only)
Affects entire
Drive (Y/N)
User Data
Accessed
(Y/N)
Affected LBA
Unlocked
ReadLock=Write
Lock=False
Affected LBA
Locked
ReadLock=Write
Lock=True
00h Y Test unit ready Y N Executable Executable
01h Y Rezero unit Y N Executable Executable
03h Y Request sense Y N Executable Executable
Y Extended sense
Y Field pointer bytes
Y Actual retry count bytes
04h Y Format unit [1] Y Y Executable Check Condition
07h Y Reassign blocks N Y Executable Check Condition
08h Y Read N Y Executable Check Condition
0Ah Y Write N Y Executable Check Condition
0Bh Y Seek N N Executable Executable
12h Y Inquiry Y N Executable Executable
Y Vital product data page (00h)
Y Unit serial number page (80h)
Y Implemented operating def. page
(81h)
Y Device Identification page (83h)
Y Firmware numbers page (C0h)
Y Date code page (C1h)
Y Jumper settings page (C2h)
Y Device Behavior page (C3h)
15h Y Mode select (same pages as Mode
Sense command shown below) [3]
Y N Executable Executable
16h Y Reserve Y N Executable Executable
N 3rd party reserved
N Extent reservation
17h Y Release Y N Executable Executable
18h N Copy
1Ah Y Mode sense Y N Executable Executable
Y Unit attention page (00h)
Y Error recovery page (01h)
Y Disconnect/reconnect control (page
02h)
Y Format page (03h)
Y Rigid disk drive geometry page
(04h)
Y Verify error recovery page (07h)
Y Caching parameters page (08h)
Y Control mode page (0Ah)
Y Fibre Channel Interface Control
page (19h)
Y Power control page (1Ah)