Seagate 1080SL Computer Drive User Manual


 
Note. EZ-Drive is designed for DOS installations. It supports
Microsoft MS-DOS Version 5.0 or later.
EZ-Drive does not support:
Toshiba laptops, XT or Micro Channel computers
Non-ATA hard drives (SCSI, ESDI, MFM and RLL)
Some Local Bus adapters that use 32-bit mode
Some systems that have PIO mode 3 or 4 active
OS/2 and NT
Caution. Some older virus-detection programs may misidentify
the EZ-Drive information stored in conventional mem-
ory as a virus. If all 640 Kbytes of conventional memory
are not free, such programs assume a virus is present
and clean and restore the memory. If this happens,
information about the EZ-Drive installed drive is de-
stroyed, and the computer cannot identify the drive. Do
not use these programs.
Note. The Seagate version of EZ-Drive cannot install a non-Sea-
gate drive without a Seagate drive present.
1. Boot your computer with the Seagate software diskette. This
is a precaution to ensure that the EZ-Drive installation does
not conflict with any terminate-and-stay resident (TSR) pro-
grams that may be in memory.
2. Type ez and press
ENTER.
3. Disregard the Notice dialog box. The EZ-Drive software is
authorized for installation only with the drive on which it is
shipped. Press
ENTER to continue.
16 Medalist SL Family Installation Guide, November 1995