Seagate ST9550AG Computer Drive User Manual


 
Read before you begin
...
Application. Your drive is designed for IBM AT and compatible
personal computers, particularly laptop and notebook models.
Warning. Turn off the computer (and, if you have a notebook
or laptop computer, remove the battery) before you
open the case or touch any internal components.
Caution. Special training or tools may be needed to service
laptop and notebook computers. Opening the case
may void your warranty. Review the terms and condi-
tions of your warranty before opening the case.
Static discharge. Observe the following precautions:
Before handling any components, put on a grounded wrist strap.
Use antistatic padding on all work surfaces.
Avoid static-inducing carpeted areas.
Keep the drive in its static-shielded bag until you are ready to
complete the installation. Do not attach any cables to the drive
while it is in its static-shielded bag.
Handle the drive by its edges or frame.
Do not touch the I/O connector pins or the circuit board.
Drive handling. The drive is extremely fragile—handle it with
care. Do not attach labels to any part of the drive.
Inspection. After you are familiar with the handling precautions
listed above, inspect the drive. If it appears to be damaged, call
your distributor or dealer immediately.
Warranty. See your authorized Seagate
®
distributor or dealer.
Maintenance and repair. Seagate drives do not require main-
tenance. The head/disc assembly is sealed; if you break the seal,
ST9655 Family Installation Guide, Rev. A 1