Filter
Top Products
5
Installation
Before placing the printer in your chosen location, consider the following guidelines:
This printer should be placed on a normal table or desk. Be sure that the surface is level, to
avoid an uneven load on the carriage as it operates.
Do not install the printer where it may be subjected to:
·Where there is excessive dust.
·Where it may be splattered with oil or metallic dust.
·Where it may be exposed to direct sunlight.
·Where it may be accidentally splashed with water.
Installing the Front Table Extension Tray
Simply attach it to the front of printer by locating the 3 support lugs in the 3 slots at
the edge of the printer front feed.
Figure 2-4 Installing the front table extension tray
Installing and Replacing the Ribbon Cassette
1 Ensure the printer is turned OFF.
2 Open the window cover by holding the side of window cover as shown in Figure
2-5.
Figure 2-5 Opening the window cover
support lugs
Slots
Front table extension tray
Window cover