Filter
Top Products
50
4
Chapter 4
USER SETTINGS
CUSTOM SETTINGS
The custom settings let you adjust certain features of the machine to better suit your needs. The custom settings
include the following settings:
●TOTAL COUNT........................... This displays the number of pages output by the machine. (p.52)
●DISPLAY CONTRAST ................ This is used to adjust the contrast of the touch panel. (p.52)
●LIST PRINT*
1
.............................. This is used to print a setting list or a font list. (p.52)
●CLOCK........................................ This is used to set the date and time of the machine’s built-in clock. (p.52)
●TRAY SETTINGS........................ This is used to configure the paper type and paper size settings for each
tray, and select whether or not automatic switch over to another tray with the
same size and type of paper will take place if the paper runs out during
continuous printing. (p.52)
The following settings are explained in detail in the operation manual for facsimile.
●ADDRESS CONTROL*
2
.............If your machine has the fax option, this setting is used to store fax numbers
for automatic dialling. Group keys and user indexes can also be
programmed.
●RECEIVE MODE*
2
...................... This is used to select the fax receive mode (automatic or manual).
●FAX DATA FORWARD*
2
............This is used to forward faxes received in memory to another destination.
●KEYBOARD SELECT*
3
.............. When using the fax or network scanner function, use this setting to change
the layout of the keyboard in the letter entry screen. (p.52)
●KEY OPERATOR PROGRAMS .. Settings for key operators (administrators of this machine). A key appears for
these settings in the custom settings menu screen. For explanations of the
settings, see the Key operator’s guide. (For explanations of key operator
programs for the fax option, see the operation manual for facsimile.)
*
1
The fax option or network printer function must be installed.
*
2
The fax option must be installed.
*
3
The fax option or network scanner function must be installed.