Filter
Top Products
113
Unit prices (Dynamic UPC file)
* In case that price shift function is allowed, the register prompts to enter a unit price for the following level by
displaying “P2” thru “P6” on the display, and when a unit price of level 6 is entered, the register goes to the
status for programming the following PLU/UPC. When you press the
Ç
on the way of programming multiple
prices for a PLU/UPC code, prices for the remained levels are kept unchanged.
In case that single price entry is allowed for a PLU/UPC code, the register goes to the status for programming
the following PLU/UPC.
The preset amount will work as the unit price for the “Preset” type and as the HALO amount for the
“Open” type. In the case of the “Open” type, zero preset prevents amount entry and a 9999.99
preset is the maximum limitation. In the case of the “Preset” type zero and 9999.99 preset have no
special meaning. (i.e. 0 amount preset is available.)
Programming “$1.25, $1.50, $2.00, $2.50, $3.00, $4.00” for price level 1 thru 6 of PLU1
Unit price
1210
.@
1
@
125
t
150
t
200
t
250
t
300
t
400
t
Ç
PrintKey operation
Example
Note
Ç
PLU code
(max. 5 digits)
To program for the following PLU/UPC
To program any PLU/UPC
1210
1060
.
@
@
Ä
UPC code
(6 to 13 digits)
* To program unit price 2 thru 6
(only when price shift function is allowed)
To program for the following PLU/UPC
To keep current setting
Unit price
(max. 6 digits)
ı
Procedure
1060Direct1210
PGM 2PGM 1