Sharp ER-A530 Cash Register User Manual


 
10
PRINTER
The printer is a receipt/journal dual station type thermal printer which delivers fast, quiet and high quality
printing. The average life of the printer is approximately 5 million lines.
When opening the printer cover, unlock the printer cover
using the printer cover lock key, and lift up the cover as
shown in the diagram to the right.
Your register is shipped with the print head release lever
held in the up position by a white shipping retainer. Be sure
to remove this retainer (see the figure at the right) and
push down the print head release lever before you use the
register.
Print head release lever
The print head can be lifted by
the green lever on the right side
of the printer. Pulling the lever
forward, lifts the print head up. If
the paper becomes jammed and
you need to move the print head
farther forward, you can pull the
lever even further toward you
and proceed with the removal of
the jammed paper.
Do not attempt to remove the paper roll with the head in the down position. This may result in
damage to the printer and print head.
Note
Retainer
Printer lock keyPrinter cover
Paper roll location
Take-up spool
Print head
release lever
Paper chute