Filter
Top Products
118
Item label (Dynamic UPC file)
You can program a maximum of 16 characters (item label) for each PLU/UPC.
Select the characters you want to program, referring to section “2 How to program alphanumeric characters” in
chapter “PRIOR TO PROGRAMMING”.
* In case that price shift function is allowed, the register prompts to enter an item level for the following level by
displaying "P2" thru "P6" on the display, and when an item level of level 6 is entered, the register goes to the
status for programming the following PLU/UPC. You must enter texts for all price levels.
In case that single price entry is allowed for a PLU/UPC code, the register goes to the status for programming
the following PLU/UPC.
Programming “MILK_1, MILK_2, MILK_3, MILK_4, MILK_5, MILK_6” for price levels 1 thru 6
of PLU1
2214
.@
1
@
MILK_1
t
MILK_2
t
MILK_3
t
MILK_4
t
MILK_5
t
MILK_6
t
Ç
PrintKey operation
Example
2214
2064
.
@
@t
Ç
PLU code
(max. 5 digits)
Character keys
(max. 16 digits)
To program any PLU/UPC
To keep the current setting
*To program for price levels 2 thru 6
(only when price shift function is allowed)
To program for the following PLU/UPC
Ä
UPC code
(6 to 13 digits)
Procedure
20642214
PGM 2