Filter
Top Products
199
Cashier/server code
Cashier
no.
The subsequent printout occurs in the
same format as in the sample X report.
Cashier/server name
Sales total
Vender coupon UPC
counter and total
Gratuity total
Cash tip total
Charge tip total
Tip-paid total
Customer counter
Cover counter
Commission 1 sales total
Commission 1 amount
(commission 1 sales
total x commission 1 rate)
Commission amount total
Non-commission sales
total
Cashier/Server report
Using this function, you can take X and Z reports for individual cashiers/servers or all cashiers/servers.
Individual cashier/server reading and resetting
The OP X/Z-mode reading and resetting is allowed only when your machine has been programmed
for "OP X/Z mode available" in the PGM2 mode.
• Sample X report • Sample Z report
Note
* When you take these reports in the OP X/Z mode,
the X report shows an “OP X” and the Z report
shows an “OP Z”.
Full cashier/server reading and resetting
The printout occurs in the same format as in the sample report of individual cashier/server, but all
cashiers/servers' sales data are printed in the order of cashier/server code number (from #1 to #20), and then
the total of all cashiers/servers is printed.