Sharp MX-7500N Printer User Manual


  Open as PDF
of 40
 
22
ConguretheoutputsettingsforcopiesusingSort,Group,Offset,Staple,Punch,orFold.
Basic operations
1
Select [Output]
2
Copy output settings
3
Check the preview image
4
Start (Black & white, or colour)
1
Specify the output tray
2
Select the output and paper output type
3
Specify the details of output mode
COPY OUTPUT
Output tray settings
Specify the destination to output copies.
The output tray currently selected is indicated by an arrow.
(When a nisher (100-sheet stapling) or saddle nisher
(100-sheet stapling) is installed)
The [Middle Tray] key can be selected.
Outputs to the offset tray
Outputs to the right tray
If the offset, staple sort, saddle stitch, fold, or
punchfunctionisspecied,therighttrayisnot
available.
Offset function
(When a nisher or saddle nisher is installed)
Select this function when you wish to output copies while shifting
them set by set.
Selecting the staple function clears the Offset checkmark
automatically.
Sort/Group function
This function sets the sorting method when copying a scanned
original.
Sorts the scanned original on a set basis, and
outputs them
Groups the scanned original on a page basis,
and outputs them.
Sort staple
(When a nisher or saddle nisher is installed)
This function staples the output copies and deliver them to the tray.
1 staple in back
1 staple in front
2 Staples
Copies can be folded at the centre, stapled,
and output.
This function is only available when a saddle
nisherisinstalled.
Output tray settings
 previous next