Filter
Top Products
23
COPY OUTPUT
Saddle Stitch
(When a saddle nisher is installed)
Copies can be folded at the centre, stapled, and output.
(When a trimming module is installed on the saddle nisher)
For saddle folding, it trims a side drop, offering a good-looking output
image.
Scanning 2-Sided originals
Tap this to switch the cover setting Off or On, or to
congurethepapertraysettings.
Releases saddle stitch Scans 1-Sided originals
This selects left binding
This selects right binding
Trimmer Setting
(When a trimming module is installed on the saddle nisher)
Enabling"SaddleStitch"allowsyoutocongurethetrimmer
settings.
Turns off the trimmer setting
Turns on the trimmer setting
Specify the trimming width
within the range of 2.0 to
20.0 mm
Folding function
(When a saddle nisher or folding unit is installed)
Copies can be folded and output.
Selects saddle fold
Selects Z-fold
Selects C-fold
Selects accordion fold
Selects double fold
Selects half fold
Detail setting screen for each folding type
Folds paper so that the print side faces downward
during output
Select the size of paper to be folded with
Z-fold
(One of either A3, B4, A4R, 11” x 17”,
8-1/2” x 14” and 8-1/2” x 11”R can be
selected)
Folds paper so that the print side faces upward
during output
Select this option to fold multiple sheets together Folds paper for left binding during output
Displays a folding image Folds paper for right binding during output
Punch function
(When a punch module is installed)
This function punches copies and outputs them. It is available for paper sizes B5R to A3.
Punches holes during output