5
Symbols in this manual
To ensure safe use of the machine, this manual uses various safety symbols. The safety symbols are
classiedasexplainedbelow.Besureyouunderstandthemeaningofthesymbolswhenreadingthemanual.
WARNING CAUTION
Indicates a risk of death or serious injury. Indicates a risk of human injury or property
damage.
CAUTIONS
If you notice smoke, a strange odor, or other abnormality, do not use the machine.
Ifusedinthiscondition,reorelectricalshockmayresult.
Immediately switch off the main power and remove the power plug from the power outlet.
Contact your dealer or nearest authorised service representative.
Do not use a ammable spray to clean the machine.
Ifgasfromthespraycomesincontactwithhotelectricalcomponentsorthefusingunitinsidethemachine,reor
electrical shock may result.
Do not make any modications to this machine.
Doing so may result in personal injury or damage to the machine.
Do not remove the machine casing.
High-voltage parts inside the machine may cause electrical shock.
Do not place a container of water or other liquid, or a metal object that might fall inside, on the machine.
Iftheliquidspillsortheobjectfallsintothemachine,reorelectricalshockmayresult.
If a thunder storm begins, switch off the main power and remove the power plug from the outlet to
prevent electrical shock and re due to lightning.
Do not look directly at the light source.
Doing so may damage your eyes.
Do not block the ventilation ports on the machine. Do not install the machine in a location that will block
the ventilation ports.
Blockingtheventilationportswillcauseheattobuildupinthemachine,creatingariskofre.
The fusing unit and paper exit area are hot. When removing a misfeed, do not touch
the fusing unit and paper exit area. Take care not to burn yourself.
When loading paper, removing a misfeed, performing maintenance,
closing the front and side covers, and inserting and removing trays, take
carethatyourngersarenotpinched.
WARNING
Handling precautions
Meaning of the symbols
CAUTION!
HOT
PINCH POINT
KEEP CLEAR
PROHIBITED
ACTIONS
DO NOT
DISASSEMBLE
MANDATORY
ACTIONS
Themachineincludesthedocumentlingfunction,whichstoresdocumentimagedataonthemachine'sharddrive.Storeddocumentscanbecalledupandprintedortransmittedasneeded.Ifaharddrivefailureoccurs,itwillnolongerbepossibletocall
up the stored document data. To prevent the loss of important documents in the unlikely event of a hard drive failure, keep the originals of important documents or store the original data elsewhere.
With the exception of instances provided for by law, Sharp Corporation bears no responsibility for any damages or loss due to the loss of stored document data.
Wave length 788 nm + 12 nm / -13 nm
Pulse times
MX-6500N
(330mm/s):(3.773μs±0.015μs)/7mm
MX-7500N
(360mm/s):(3.458μs±0.014μs)/7mm
Heavy paper mode
(220mm/s):(5.659μs±0.023μs)/7mm
Output power Max 1.4 mW (LD1 + LD2 + LD3 + LD4)
Laser information
Caution
Useofcontrolsoradjustmentsorperformanceofproceduresotherthanthosespeciedhereinmayresultinhazardous
radiation exposure.
This Digital Equipment is CLASS 1 LASER PRODUCT (IEC 60825-1 Edition 2-2007)