Filter
Top Products
103
WEB FUNCTIONS IN THE MACHINE
ADMINISTRATOR SETTINGS
The administrator settings are used to prohibit changes to the [Condition Settings] and to configure interface
settings.
● "Default settings"
: Select the setting for which you wish to prohibit changes.
● "Fusing Control" : The temperature of toner fusing is controlled according to the weight of the paper
that is used.
● "Interface settings"
: Enable monitoring of data sent to the network port and set restrictions.
CONFIGURING A SETTING IN THE ADMINISTRATOR
SETTINGS
1
Click [Administrator Settings] in the menu frame.
The "Default Settings" screen of the [Administrator Settings] will appear. If you wish to select a setting in the
"Default Settings" screen, go to step 3.
2
Click the desired setting, and make a selection for the setting in the screen that appears.
See "ADMINISTRATOR SETTINGS" for descriptions of the settings.
3
Click [Submit] to store the entered information.
ADMINISTRATOR SETTINGS
When "YES, NO" appears in the "Settings" column, "YES" is selected when a checkmark appears in the checkbox of
the item, and "NO" is selected when checkmark does not appear.
Default settings
Fusing Control
Item Settings Description
Prohibit Test Page Printing YES, NO This setting is used to prohibit printing of a printer test page.
Disable Default Setting
Changes
YES, NO This setting is used to prohibit changes to the default condition
settings.
List Prints 1-Sided, 2-Sided Set whether lists are printed by 1-sided printing or 2-sided
printing.
Item Settings Description
Fusing Control 16 to 23lb.
23+ to 28lb.
The temperature of toner fusing is controlled according to the
weight of the paper that is used.