Sharp MX-M623N All in One Printer User Manual


 
1-82
BEFORE USING THE MACHINE
Contents
For the steps that follow, see the appropriate page below for the software that you are installing.
INSTALLING THE PRINTER DRIVER / PC-FAX DRIVER
To install the printer driver or the PC-Fax driver, follow the appropriate procedure in this section depending on whether
the machine is connected to a network or connected by USB cable.
WHEN THE MACHINE WILL BE CONNECTED WITH A USB CABLE (page 1-91)
WHEN THE MACHINE IS CONNECTED TO A NETWORK
This section explains how to install the printer driver and the PC-Fax driver when the machine is connected to a
Windows network (TCP/IP network).
Supported operating systems: Windows 2000
*
/XP
*
/Server 2003
*
/Vista
*
/Server 2008/7
*
* Administrator's rights are required to install the software.
6
* The above screen appears when using the "Disc 1"
CD-ROM.
The software selection screen appears.
The software selection screen appears.
Before installing the software, be sure to click the [Display
Readme] button and view the detailed information on the
software.
INSTALLING THE PRINTER DRIVER / PC-FAX DRIVER
WHEN THE MACHINE IS CONNECTED TO A NETWORK
*
- Standard installation: page 1-83
- Installation by specifying the machine's address: page 1-86
- Printing using the IPP function and the SSL function: page 1-89
WHEN THE MACHINE WILL BE CONNECTED WITH A USB CABLE: page 1-91
USING THE MACHINE AS A SHARED PRINTER: page 1-96
INSTALLING THE PRINTER STATUS MONITOR: page 1-101
INSTALLING THE SCANNER DRIVER: page 1-102
*
If the machine is being used on an IPv6 network, see "Installation by specifying the machine's address" (page 1-86).
The PS3 expansion kit is required to use the PS printer driver or the PPD driver.
To print to the machine over the Internet using the IPP function when the machine is installed in a remote location, or to
print using the SSL (encrypted communication) function, see "Printing using the IPP function and the SSL function" (page
1-89) and install the printer driver or the PC-Fax driver.
If the machine is connected to an IPv6-only network
The software cannot be installed by detecting the machine's address from the installer. After installing the software as
explained in "Installation by specifying the machine's address" (page 1-86), change the port as explained in "Changing to a
Standard TCP/IP Port" (page 1-107).
The installation procedure in this section is for both the printer driver and the PC-Fax driver, although the explanations are
centred on the printer driver.