Filter
Top Products
7-8
7
Connecting MM Series To Host Computer
The following shows how to connect the MM series to the host computer for the first
time using the connection cradle.
Do not connect the USB cable until instructed to do so (in Step5 below).
1. Install the Connection Cradle program to the host computer (shown on the
previous page).
2. Turn off the MM series.
You cannot connect the MM series to the host computer when the MM series is
powered on or in the standby/hibernate mode.
3. Connect the AC adapter to the connection cradle and insert the MM series into
the connection cradle. (Refer to Charging battery pack using the connection
cradle on 7-6.)
4. Make sure the battery indicator on the connection cradle is powered on and slide
the host PC connection switch on the connection cradle to OFF.
READY
ON
OFF
HDD
5. Connect the connection cradle with the host computer using the supplied USB
cable.