Filter
Top Products
-17
Setting and Adjusting the
Projector
(Settings & Adjustments)
Example: “Picture” screen display for COMPUTER
On these screens, you can make projector
settings or adjustments. You can set or
adjust the following items:
Controlling the Projector via LAN
Picture Mode
CLR Temp
BrilliantColor
TM
Progressive
DNR
Eco + Quiet Mode
Resolution Setting
Signal Type
Video System
Dynamic Range
Resize
Overscan
OSD Display
Background
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Projection Mode
DLP
®
Link
TM
DLP
®
Link
TM
Invert
Video Setup
OSD Language
Auto Sync
Auto Power Off
Auto Restart
System Sound
Audio Out
Internal Speaker
Audio Input
RS-232C Speed
Fan Mode
All Reset
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
If you click the “Refresh” button before the
screen is displayed completely, an error
message (“Server Busy Error”) will be
displayed. Wait for a moment and then operate
again.
You cannot operate this page while the
projector is warming up.
For details about each item, refer to the
projector's operation manual.
•
•
•
Note
Setting the Security
(Network – Security)
On this screen, you can make settings
relating to security.
Items Description
User Name Setting of user name for security
protection.
Password Setting of password for security
protection.
Accept IP
Address
It is possible to set up to three IP
addresses allowing connection to the
projector.
All IP
Addresses
No limits are set to IP addresses
connecting to the projector.
From only
specifi c IP
addresses
For security improvement, only an IP
address set by “Address 1-3” can be
connected to the projector.
User Name and Password can be up to 8
characters.
You can input the characters below:
a-z, A-Z, 0-9, -, _
•
•
Note