Filter
Top Products
5
A40267, SCR/SCRNZ R380H O/M
OPERATION OF TOUCH CONTROL PANEL
The operation of the oven is controlled by pressing the appropriate pads arranged on the surface of the control panel.
An entry signal tone should be heard each time you press the control panel to make a correct entry.
In addition the oven will beep for approximately 2 seconds at the end of the cooking cycle, or 4 times when a
cooking procedure is required.
Touch Control Panel Layout
Control Panel Display
1
2
3
4
5
6
7
8
9
10
11
12
13
11.TIMER/CLOCK PAD
Press to set Timer and Clock.
12.STOP/CLEAR PAD
Press to clear during programming.
Press once to stop operation of oven
during cooking; press twice to can-
cel cooking programme.
13.INSTANT COOK/START PAD
Press once to cook for 1 minute on
HIGH or increase by 1 minute mul-
tiples each time this pad is pressed
during cooking. Press to start oven
after setting programmes.
7.MORE, LESS PADS
Press to increase/decrease the
time in one minute increments dur-
ing cooking or to alter the cooking
result for the automatic operations.
8.HELP PAD
Press to select auto start, child lock,
demonstration modes or info on
pads.
Press to get cooking information.
9.NUMBER PADS
Press to enter cooking times, clock
time, weight or quantity of food.
10.POWER LEVEL PAD
Press to select microwave power
setting.
If not pressed, HIGH is automatical-
ly selected.
1.EXPRESS MENUS PADS
Press to select "Express Menus"
menus.
2.SENSOR COOK PADS
Press to select Sensor Cook menus.
3.SENSOR REHEAT PAD
Press to select a reheat menu.
4.EASY DEFROST PAD
Press to defrost frozen food by en-
tering quantity.
5.QUICK AND EASY PAD
Press to select Quick and Easy
menus.
6.SLOW COOK PAD
Press to cook slowly and for a long-
er time.
Indicator
R380H,O/M,P05- 03.8.9, 4:25 PM5