Filter
Top Products
35
US
Basic Operation
AV input mode menu items
NOTE:
»“INPUT2 Select” is not displayed when the input mode is set to “INPUT2”.
» Due to the type of signal and its frequency, some items are not selectable and grayed out.
» If “Underscan” has been selected in “Wide Mode”, most picture adjustment items cannot be used (except for
some settings in “Advanced”).
53
53
53
55
54
54
55
56
36
56
56
56
56
57
54
54
51
51
Picture
Audio
Power control
Setup
Option
Contrast/Black Level/Color/Tint/
Sharpness/
Advanced
C.M.S. (H)/(S)/(V) /Color Temp/Black/
3D-Y/C / Monochrome/Film Mode/
I/P Setting
Treble/Bass/Balance
Brightness
Power Management
Wide Mode/Color System/
DNR/Quick Shoot/
Monitor Speaker Output
Lock Item
Menu Display/Remote/Buttons/Power/
RS-232C
PIN/PIN Clear
Control Lock
Input Select
Position
Picture Flip
Language
INPUT2 Select
ID No. Setting
Enlarge
Panel Protection Cover
H-Pos./V-Pos.
INPUT1: AV, Y/C
INPUT2:
INPUT3: COMPONENT
Menu Items (Continued)
For a table of adjustment ranges for each menu item,
please see Appendix3 on page 71.