Filter
Top Products
52
Selecting the Power Save Mode
The Power Save Mode or the Automatic Power Shutoff function allows you to reduce the
power consumption of the projector.
Setting the Power Save
Mode
Function to control the quantity of projected
light. Select “ON” or “OFF” to decrease or
increase brightness and power consumption.
Description of Power Save Modes
ON
Quantity of light is 80%.
Power consumption is 250W.
OFF
Quantity of light is 100%.
Power consumption is 290W.
Select “Power Save” in the “Options (1)”
menu ➝ For settings, see page 36.
Note
•“Power Save” mode is factory preset to
“OFF”.
Automatic Power
Shutoff Function
When no input signal is detected for more than
15 minutes, the projector will automatically
shut off if set to “
(On)”.
The Auto Power Off function will be disabled
when it has been set to “
(Off)”.
Select “Auto Power Off” in the “Options (1)”
menu ➝ For settings, see page 36.
Note
•When the Auto Power Off function is set
to “
(On)”, 5 minutes before the power
turns off, the message “Power OFF in X
min.” will appear on the screen to indicate
the remaining minutes.
-52