Filter
Top Products
Easy to Use Functions
-59
Displaying the Break Timer
"On-screen Display
Displaying and Setting
the Break Timer
Select “Break Timer” from the “Options
(2)” menu ➝ For details, see page 36.
1 When
“ ”
is displayed, press
or
to set the Break
Timer.
•You can set anywhere between 1 and
60 minutes (in 1 minute units).
2 Press
to cancel the Break
Timer.
Note
•Auto Power Off will be temporarily dis-
abled during the Break Timer.
If no signal transmission occurs for more
than 15 minutes after the Break Timer has
completed, the projector will turn off.
•The Break Timer will be displayed on the
startup image. To change the screen dis-
played during the Break Timer, change
the setting of “Startup Image” (see page
57).