Filter
Top Products
Sending a Fax by Automatic Dialing
70
1
If you are sending a fax, load the
document(s).
• If desired, press to set
the resolution and/or contrast.
2
Press once. <REDIAL> appears in the display, followed by the
last number dialed. Make sure the number that appears is the number
you wish to dial.
3
If you are sending a fax, press . Dialing begins.
If you are making a phone call, lift the handset. Dialing begins.
RESOLUTION/
RECEPTION MODE
REDIAL
Z
START/
MEMORY
Redial
You can automatically redial the last number dialed on the fax machine. This
procedure can be used to send a fax or make a phone call.
Automatic redialing
If you use automatic dialing (including Direct Keypad Dialing) to send a fax
and the line is busy, the fax machine will automatically redial the number. The
fax machine will make three redial attempts at intervals of five minutes. During
this time, RECALLING will appear in the display, followed by a two-digit
number assigned to the fax job. You will not be able to dial any other locations
while the message appears.
♦ You can press to clear the message and stop automatic redialing.
♦ Under certain conditions (for example if a person answers the call on a
telephone), automatic redialing may stop before three redialing attempts
are made.
STOP
READY TO SEND
all.book Page 70 Wednesday, November 12, 2003 9:50 AM