Filter
Top Products
Distinctive Ring (Requires Subscription to Service)
93
6. Special
Functions
4
Press a number from 1 to 3 to select the ring pattern below that matches
your second number’s ring pattern. Press 4 to have your fax
automatically answer your normal telephone number. Press 5 to turn off
the distinctive ring function.
5
Press to return to the date and time display.
6
Set the reception mode to FAX.
RING PATTERN 1 Two short rings
RING PATTERN 2 One short, one long, and one short ring
RING PATTERN 3 Two short rings and one long ring
STANDARD RING Your standard (normal) ring pattern
OFF SETTING Turn distinctive ring off
STOP
The display briefly shows
your selection, then:
FAX SIGNAL RX
RESOLUTION/
RECEPTION MODE
FAX
TAD
TEL
1
2
3
4
5
♦ When using distinctive ring, you must set the reception mode of your fax
machine to FAX. When your designated fax number is dialed, your fax will
automatically answer and begin reception after two rings. Note that other
devices on the same line will also ring until your fax answers. If one of your
other numbers is dialed, the fax will ring; however, it will not answer.
all.book Page 93 Wednesday, November 12, 2003 9:50 AM