Filter
Top Products
Messages and Signals
108
LINE ERROR Transmission or reception was not successful. Press
the STOP key to clear the message and then try
again. If the error persists, see Line Error on page
101.
MEMORY IS FULL/
SEE MANUAL
(alternating messages)
The memory is full. You may have too many
messages recorded in the answering machine. To
erase messages, see page 45.
This message may also occur during fax reception if
too much data is received before the pages can be
printed out. If faxes have been received to memory
because printing is not possible (an additional
message will indicate the problem), resolve the
problem so that printing can continue (see Substitute
Reception to Memory on page 84). If you are
attempting to transmit from memory, see If the
memory becomes full on page 74. If you are copying,
see If MEMORY IS FULL appears on page 85.
MEMORY PRINTING The fax is preparing to or printing out a document
from memory.
MESSAGES RCVD:XX This indicates that you have received messages in
the answering machine. “XX” is the number of
messages.
NO DATA This appears if you attempt to search for an auto-dial
number when none have been stored.
OFF HOOK This appears if you forgot to replace the handset after
using it to dial and send a fax. Replace the handset or
press the STOP key to clear the message.
ON HOOK DIAL
The key has been pressed and the fax machine
is waiting for you to dial.