Filter
Top Products
Setup for SMS Test Messaging
30
Specifying the carrier
If you entered a number for a second center using the previous procedure and
are going to use that center for your SMS service, follow the steps below to
select “2nd CARRIER”.
♦ The initial setting is ANNY WAY.
Note: This setting only selects the center used for transmission of SMS
messages. Messages can still be received from any center where you are
registered.
1 Press and .
2 Press .
3 Press .
4 Press to select MATERNA, or
to select the 2nd carrier.
• Note: If you select the 2nd carrier and “ENTER 2nd NUMBER” appears in
the display, enter a number for the 2nd center as explained on the previous
page and then repeat the above steps to select it.
5 Press to return to the date and time display.
SMS
1
2
STOP
Display:
The display briefly shows
your selection, then:
Printing the SMS Quick Reference Sheet
For a quick reference to the SMS functions, press and to print
the SMS Quick Reference Sheet.
SMS
KOPIE/HILFE/ABRUF
SMS SETTING
SMS CARRIER
SELECT CARRIER
1=ANNYWAY, 2=2nd
SMS CENTER #