Filter
Top Products
Optional Answering Machine Settings
46
1 Press once and once.
2 Press once and once.
3 Press .
4 Press a number from 1 to 4 to select the desired ICM recording time.
5 Press to return to the date and time display.
15 seconds 60 seconds
30 seconds 4 minutes
FUNKTION
STOP
Optional Answering Machine Settings
Setting ICM time
Incoming messages (ICMs) are the messages which callers leave for you on
the built-in answering machine. The answering machine is set at the factory to
allow each caller a maximum of 4 minutes to leave a message. If desired, you
can change this setting to 15, 30, or 60 seconds.
Display:
1
2
3
4
The display briefly shows
your selection, then:
Fax reception on A.M. failure
If the memory for recording incoming messages becomes full while you are
out, the answering machine will no longer be able to record messages. The
ON A.M. FAILURE setting is used to choose the response of the machine to
incoming calls when this happens:
♦ Automatic fax reception NO: The machine will answer after 10 rings, after
which it will wait to receive a remote command. Most callers will hang up
before it answers; however, when you call the machine from a remote
location, you can wait until it answers, listen to your messages, and then
erase them (see Remote Operations on page 53).
A.M. SETTING
RECORDING TIME
REMOTE CODE