Filter
Top Products
29
Useful Features
TOOLS
R-CLICK ENTER
INPUT
MOUSE
LIGHT
LCD PROJECTOR
ADJ.
IrCOM
FREEZE
AUTO SYNC
KEYSTONE
ENLARGE
MENU
LASER
BLACK
SCREEN
OFF
2
1
This function allows you to magnify a specific portion of
an image. This is useful when you want to display a
detailed portion of the image or display it in its native
resolution.
(To use the “Power” remote control to operate this
function, slide the MOUSE/ADJUSTMENT switch to
the ADJ. position before pressing ENLARGE.)
1 Press ENLARGE. Each time ENLARGE is
pressed, the image will be magnified.
2 When the image is magnified, you can pan and
scan around the image by using ∂/ƒ/ß/©.
• Each time ENLARGE is pressed, image magnification
toggles as shown below.
1. When the input resolution is smaller than XGA (VGA,
SVGA)
Dot by dot1 2 4 8
2. When the input resolution is XGA
1 2 4 8
3. When the input resolution is larger than XGA (SXGA,
UXGA)
Dot by dot1 2 4 8
• If the input signal is changed during digital image
magnification, the image will return to ן1. The input signal
is changed (a) when INPUT is pressed, (b) when there
is no input signal, or (c) when the input resolution and refresh
rate changes.
Dot by dot mode display
This mode displays images in their native resolution and
not expanded to fit the LCD resolution. See the steps
and the note above to display an image in dot by dot
mode.
Projector
MOUSE
ADJ.
sg
On-screen Display
Digital Image Magnification and Reduction