Filter
Top Products
ENGLISH
11
APPLICATION THREE: Two PSM200 Wireless Systems Used Simultaneously*
The following configuration uses two PSM200 systems simultaneously, and utilizes the SPLIT OUT feature of the TransMixer. In this exam-
ple, the musicians keep the TransMixers on stage with them, in order to control their personal mixes independent of the house engineer.
1. Connect the vocal mic to INPUT 1 of the Vocal Mix TransMixer and connect SPLIT OUT 1 (the vocals) to the
Mixing Console.
2. Connect the total band mix from the Mixing Console to INPUT 2 of the Vocal Mix TransMixer.
NOTE: In this example, the band mix includes vocals. This allows the guitar mix to include vocals,
and allows the vocalist to independently control more of the vocal level in his/her personal mix.
3. Set the Vocal Mix P2T and P2R Receiver to the same frequency channel.
4. Connect SPLIT OUT 2 of the Vocal Mix TransMixer (the band mix) to INPUT 1 of the Guitar Mix TransMixer.
5. Connect the guitar amp simulator to INPUT 2 of the Guitar Mix P2T TransMixer.
6. Connect the SPLIT OUT 2 of the Guitar Mix TransMixer (the guitar amp simulator) to the Mixing Console.
7. Set the Guitar Mix P2T TransMixer and P2R Receiver to a frequency channel that’s different from the channel you
set for the Vocal Mix system in step 3.
* Up to four systems can be used at the same time.
Mixing Console
Vocal Mix
Guitar Mix
Vocal Mic
SPLIT OUT
from
TransMixer
Band Mix
SPLIT OUT
from
TransMixer
Guitar Amp
Simulator
SPLIT OUT
from
TransMixer
Band Mix
Vocal
Mix
Guitar
Mix
Guitar Amp
Simulator
Vocal
Mic
DIRECT BOX
RACK MOUNTING THE P2T
The P2T features a standard
1
/
2-
rack space design, and includes a rack mounting kit.
Install Rack Ears
Mount in an Equipment Rack
Single Unit
Dual-Mounting Two Units
CHANNEL
SELECT
PSM200TransMixer
MIC/LINE1
MIC/LINE2
1 INPUTS
2
CHANNEL
SELECT
PSM200TransMixer
MIC/LINE1
MIC/LINE2
1 INPUTS
2
CHANNELSELECT
PSM200TransMixer
MIC/LINE1
MIC/LINE2
1 INPUTS2
NOTE: Be sure to use both straddle bars when installing dual units.
CHANNELSELECT
PSM200TransMixer
MIC/LINE1
MIC/LINE2
1 INPUTS 2
CHANNEL
SELECT
PSM200TransMixer
MIC/LINE1
MIC/LINE2
1
INPUTS
2
CHANNEL
SELECT
PSM200TransMixer
MIC/LINE1
MIC/LINE2
1 INPUTS
2
WARNING: Do not torque the screws too tightly, or the chassis may be damaged.