Filter
Top Products
T12017-Sentry_LANServer_Users_Manual Page 40 of 59
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com
Tel: (408) 262-2299 Fax: (408) 262-2269 Toll_Free: 888-509-1970 email: support@fieldserver.com
There is no corrective action to be taken other than to reduce the number of controls on the
various screens that form the project, reprocess the whole project and download the
modified files to the LANServer.
As a guideline it is suggested that the user budget 20-25 bytes per Sentry-Sensor. The
actual number used per Sentry-Sensor is dependent on the length of the tag name and the
length of the units field.
Appendix 1.8. Sentry Calibration Backup (SentryBK) produces a warning
message on completion.
If the following warning dialog is produced on completion of the backup then the user needs
to read and act on the following notes.
This warning is produced if the register 40977 is not backed-up. This register is one of the
new registers backed-up in rev 1.03a of the control.
Depending on the configuration, this may be what is desired. However, if backing up the
registers prior to a firmware change in the Sentry then take the following actions before
changing the firmware.
1. Edit C:\Program Files\FST_SentryBK\index.txt and add the following lines to the file. If
the file doesn’t exist, then ignore this step.
2. Browse to the web screen which contains the SentryBK control.
3. In the Internet Explorer menu, select VIEW, Source. Notepad will start and the html
source code will be displayed.
4. Save the file to the computer
5. Find the list of registers which get backed up.
6. Add the new registers. Save the file.
7. Transfer the saved file back to the LANServer. (RuiNet –i192.168.1.81 –u1 –
lfilename.htm) or back to the standard web-server that served the file.
Appendix 1.9. LANServer Configuration LED
When the error message "WEB:#26 Err. Cant open required file 'nodes.htm'". is printed, the
configuration LED is turned on. This is done once each time the LANServer is reset.
40159,8,
40977,8,
40985,8,