Support User Manuals

Sierra Wireless 20070914 Network Router User Manual

Open as PDF

of 176

Raven 1x

35 20070914

5. VerifyyouareinPassthrumode.

AT!STATUS

6. Unlockthemodule.

AT~NAMLCK=MSL

7. SettheMDNandMSID.

AT~NAMVAL=0,MDN,MSID,0,65535

8. Verifythesettingsarewhatyouintendedtoenter.

AT~NAMVAL?0

9. StarttheIOTAsession.

AT!IOTASTART

StatuswillbeoutputuntilIOTAcompleteswith‘IOTA

Successful’or‘1012ERROR’.

10. Resetthemodule.

AT!RESET

11. Presstheresetbuttononthefrontofthemodem.When

themodemrestarts,itshouldregisteronthenetwork.

Data Link

AfteryoucompletetheIOTAsession,ifyouhaveaDataLink

account,youcansetupDataLinkinthemodem.

Caution: The Raven needs to be activated via IOTA with a standard

“Vision” account before you can enter the Data Link settings. Entering

the Data Link configuration before the Raven is activated will prevent

successful activation.

1. Putmodemintopassthrumode.

AT\APASSTHRU

2. VerifyyouareinPassthrumode.

AT!STATUS

3. SettheNAI.

AT$QCMIPNAI=[NAI],1

4. SettheIPaddressoftheprimaryhomeagent.

AT$QCMIPPHA=[PHA_IP],1

5. SettheIPaddressofthesecondaryhomeagent.

AT$QCMIPSHA=[SHA_IP],1

6. Setthehomeagentsharedsecretkey.

AT$QCMIPMHSS=oursecretmnhakey,1

7. SettheAAAsharedsecretkey.

AT$QCMIPMASS=[AAA_Key],1

8. Enablereversetunneling.

AT$QCMIPRT=1,1

previous next