Support User Manuals

Sierra Wireless 20070914 Network Router User Manual

Open as PDF

of 176

Raven 1x

84 20070914

a. EnableS82,UDPautoanswer.

b. SetS83totheidletime‐outapplicabletoyourappli‐

cation,commonly20.

4. Configure other RTU settings.

Otherparametersmayneedtobechanged,butthisis

dependentontheRTUtypebeingused.Asaminimum,this

typicallyinvolvessettingtheproperserialsettingstomatch

yourRTU.

5. Optional: Dynamic IP Address

IfyoudonothaveastaticIP,thehostmodemshouldbe

configuredtoreportitscurrentIPtoaDynamicDNS(DDNS)

serverwithIPManager.

Youwillneedtomatchthenameofthemodemtothenames

specifiedinthehostmodem’sMLIS TorMLISTXforthe

connectedRTU.

WhenyouconfigureIPManagerforthehostmodem,make

noteofyourmodemnameanddomainsettinginAceManager

inthemenuselectionDynamicIPtobeusedwiththeremote

modems.

Figure 8-8: AceManager: Dynamic IP

WhenyouusenamesinsteadofIPaddresses,toensureyour

modemsareupdatedquicklywiththecorrectIPaddressesfor

thenames,youwillwanttosettheDNSsettingsaswell.In

AceManager,selectDNS.

previous next