Filter
Top Products
TECHNICAL SPECIFICATIONS
1.6
Prior to the initial use of the exposure device as a shipping container, the user must register
with the Transportation Certification Branch, Office of Nuclear Safety and Security,
U.S. Nuclear Regulatory Commission. The user should have in his possession a copy of the
Certificate of Compliance issued for the exposure device, which may be obtained from
Sentinel, QSA Global, Inc. customer service centers upon request. This also applies to
users from Agreement States and other regulatory jurisdictions.
It is the responsibility of users of this equipment outside of the United States to comply
with all local, national and international regulatory, licensing and transportation rules and
regulations as they apply in their respective countries.
Warranty and limitation of liability
QSA Global, Inc. (herein referred to as the manufacturer) warrants its product
which it manufactures and sells to be free from defects in material and workmanship
for a period of one year from the date of shipment. This warranty shall not apply to any
product or parts which have been subjected to misuse, improper installation, repair,
alteration, neglect, accident, abnormal conditions of operation, or use in any manner
contrary to instructions.
The manufacturer's liability under such warranty shall be limited to replacing or repairing,
at its option, any parts found to be defective in such respects, which are returned
to the manufacturer, transportation prepaid; or at its option, to returning the purchase
price thereof.
The warranty on other manufacturer's components shall be that of the original manufacturer
whose warranty shall be binding.
In no event shall the manufacturer be liable for any incidental or consequential damages,
whether or not such damages are alleged to have resulted from the use of such product in
accordance with instructions given by or referred to by the manufacturer.
QSA Global, Inc. assumes no liability or responsibility for the usage of any
radioactive material or device generating penetrating radiation used in connection with this
product. The use of such material or generators in any manner other than prescribed in the
U.S. Nuclear Regulatory Commission or equivalent Agreement State or permitted by any
regulation of the U.S. Nuclear Regulatory Commission or State Regulation may constitute a
violation of such license terms.
All other warranties, except those warranties expressly stated herein, including without
limitation warranties of, merchantability and implied warranties of fitness,
are expressly excluded.
The warranty on this device is specifically limited to its use only with sealed sources and
connectors, parts, and accessories manufactured by QSA Global, Inc.
QSA Global, Inc. has received equipment approvals for the Model 880 Delta,
Sigma and Elite systems from the Commonwealth of Massachusetts, the USNRC
Transportation Branch, The U.S. Department of Transportation, and the Canadian Nuclear
Safety Commission. This requires use of Agreement State or USNRC registered and
approved remote controls, control cables, projection sheaths, sealed source assemblies,
remote control cranks used in conjunction with the Model 880 Delta, Sigma or Elite.
For additional information on compliance with Type B(U) certifications, USNRC 10CFR34,
ANSI N432-1980 or ISO 3999-1:2000(E) please contact QSA Global, Inc.
Sentinel, QSA Global, Inc. shall not be liable for any errors or omissions contained
herein and the provision by Sentinel, QSA Global, Inc. of the information set out in
this manual does not in itself constitute acceptance of any liability on the part of Sentinel,
QSA Global, Inc.