Filter
Top Products
3.5 Replacing the storage backplane
34 Chapter 3: Replacing installed components
Note: You must remove the CD-ROM,
front panel and FDD cables before removing
the backplane. See 3.2 Replacing mother-
board components for details on how to do
this.
3. Remove the three screws that secure the S-ATA back-
plane bracket to the chassis.
4. Remove the S-ATA backplane bracket and backplanes
free from the chassis.
5. Remove the six screws that secure the S-ATA backplane
to the bracket.
6. Remove the S-ATA backplane.