Filter
Top Products
Unaligned projected image
The SMART V25 projector image can slip if the projector is moved often or installed in a location
prone to vibration, such as next to a heavy door. Follow these precautions to help prevent the image
from becoming misaligned:
l Make sure that the installation wall is plumb and square and doesn’t move or vibrate
excessively.
l Make sure that there are no obstructions behind the projector’s wall mount bracket, and that the
bracket is firmly secured to the wall according to the installation instructions.
l Make sure that the knob and locking screw are tight.
l Confirm that all cables are held in place with the appropriate cable clip.
l Adjust the projected image. See the included SMART Board 480iv and 680iv Interactive
Whiteboard Systems Installation Guide (smarttech.com/kb/153153) and Adjusting the image
on page 20.
Accessing the service menu
C C AU TI ON
l To prevent tampering or unintentional changes, only system administrators should access
the service menu. Do not share the service menu access code with casual users of your
interactive whiteboard system.
l Do not adjust any settings in the service menu other than those listed in this guide. Changing
other settings can damage or affect the operation of your projector and invalidates your
warranty.
C HA PT ER 6
Troubleshootingyour interactivewhiteboard system
48