Filter
Top Products
8 PMWT-660/680 Installation Guide
Projector Bracket Attachment for a 660
Projector Bracket Attachment for a 680
2. Lay the wall mount bracket on the floor or any large, flat surface.
3. Using the same security hex key, attach the upper support to the wall mount bracket by
inserting two No. 8-32 × 1/2" security hex screws in the third hole from the top, as shown in the
diagram below. Leave the screws loose enough to allow for movement of the upper support.
Protruding
Threaded
Inserts
Projector
Brackets
1/2" Screw
1" Screw
Protruding
Threaded
Inserts
Projector
Brackets
1/2" Screw
1" Screw
Upper Support
Wall Mount