Filter
Top Products
PMWT-660/680 Installation Guide 9
4. Attach the lower support to the wall mount bracket by inserting two No. 8-32 × 1/2" security
hex screws in the third hole from the top, as shown in the diagram below. Leave the screws
loose enough to allow for movement of the lower support.
5. Align the vacant screw holes on the lower support with the ones on the upper support, and
insert a No. 8-32 × 1" security hex screw in each side.
NOTE: The location of the vacant holes differs between the projector mounts for the 660 and
680, as shown in the following two diagrams.
Attaching the Upper and Lower Support for a 660
Attaching the Upper and Lower Support for a 680
Wall Mount
Lower
Support
Upper
Support
Vacant
Screw Hole
Upper Support
Lower Support
Vacant
Screw Hole
Lower Support
Upper Support