Filter
Top Products
I
NTERFACE
C
OMMANDS
3-95
Syntax
clear counters interface
interface
• ethernet unit/port
- unit - This is device 1.
- port - Port number.
• port-channel channel-id (Range: 1-6)
Default Setting
None
Command Mode
Privileged Exec
Command Usage
Statistics are only initialized for a power reset. This command sets the
base value for displayed statistics to zero for the current management
session. However, if you log out and back into the management
interface, the statistics displayed will show the absolute value
accumulated since the last power reset.
Example
The following example clears statistics on port 5.
show interfaces status
Use this command to display the status for an interface.
Syntax
show interfaces status interface
interface
Console#clear counters ethernet 1/5
Console#