35 (GB)
On/Off Timer Function
1 In the CONFIG menu, Press M/m to move the
cursor (B) to “POWER CONTROL” and press
ENT.
The following menu appears on the monitor
screen.
ENTER
MENU
POWER CONTROL
POWER SAV ING : OFF
ON/OFF T IMER : OFF
SELECT SET END
2 Press M/m to move the cursor (B) to “ON/OFF
TIMER” and press ENT.
The following menu appears on the monitor
screen.
ON/OFF T IMER : OFF
3 Select ON with M/m and press ENT.
The following menu appears on the monitor
screen.
ENTER
MENU
ON/OFF T IMER : ON
ON T IME : 16 : 30
OFF T IME : 17: 20
SELECT ADJUST END
4 Press ENT.
The cursor (B) appears on the monitor screen.
Controlling Power On/Off Automatically (Power Control Function)
5 Press M/m to move the cursor (B) to “ON TIME”
and press ENT.
The following menu appears and the background
of the hour is displayed in cyan.
ENTER
MENU
ON/OFF T IMER : ON
ON T IME : 16 : 30
SELECT SET END
6 Set the hour with M/m and press ENT.
The hour is defined and the background of the
minute is displayed in cyan.
7 Set the minute with M/m and press MENU.
The minute is defined and the menu returns to the
ON/OFF TIMER menu.
8 Similarly, set the OFF TIME.
Notes
• The power saving function does not work when the
signal is input from the LINE connectors.
• If the sync signal is not connected to the HD/COMP
IN connector, the monitor does not turn on even if
the sync signal is input. Be sure to set POWER
SAVING to OFF when only the RGB signal is
connected.
• If the sync signal is not connected to the 13th pin of
the RGB IN (D-sub 15-pin) connector, the monitor
does not turn on even if the sync signal is input. Be
sure to set POWER SAVING to OFF when only the
RGB signal is connected.
• The power saving function, on/off timer function and
power off function in the PIC INVERSION mode
cannot be used simultaneously. When one of those
functions is set to ON, “– – – –” appears next to the
others and their functions are not available.
• If you set ON TIME and OFF TIME to the same
time, the setting of ON TIME takes priority over that
of OFF TIME. The monitor does not turn off at the
OFF TIME.