Filter
Top Products
52
GB
The picture quality
and colors of the
image previewed
on the screen
differs from those
printed.
—
c Because of differences in the display
method or profiles of an LCD screen,
please regard the image being displayed
on the display as just a reference. To
adjust picture quality, do either of the
following:
– Changing the Color Setting
(.page 28)
– Adjusting an image (.page 21)
The settings take effect on the displayed
images only.
The printed image
differs when an
image is printed
directly from the
memory card
inserted into the
printer’s slot and
when it is printed
via a PC.
—
c Because of the differences in the printer’s
internal processing and PC software
processing, the printed images will be
different.
The date cannot be
printed.
• Is “Date Print” set to “ON”? c Set “Date Print” to “ON”. (.“Setting
the Date Print” on page 26)
• Does the image support
DCF?
c The “Date Print” function of this unit
supports an image that is compatible with
the DCF standards.
The date is printed
unintentionally.
• Is “Date Print” set to “OFF”? c Set “Date Print” to “OFF”. (.“Setting
the Date Print” on page 26)
• Was the date saved with the
image when it was shot with
the digital camera?
c If the date was saved with the image, you
cannot make a print without a date.
The image cannot
be printed fully in
the print range.
Borders remain.
• Did you select “Borders
(Pattern 1)” or “Borders
(Pattern 2)”?
c Select “Borders”. (.“Setting the print
finish (Borders/Borderless print)” on
page 26)
• Is the aspect ratio of the
image correct?
c Depending on the type of digital camera
used, the aspect ratio of the recorded
image differs, so the image may not be
printed covering the entire printable area.
Symptom Check Cause/Solutions