Filter
Top Products
57
GB
Troubleshooting
The printer does
not respond to the
printing order
from the PC.
—
c If there is no trouble displayed on the
Windows desktop, check the printer’s
LCD screen.
If the printer shows trouble, do the
following:
1. Turn off the 1 (on/standby) button of
the printer.
2. Disconnect the power cable, wait for 5
to 10 seconds, and then connect the
cable again.
3. Restart your computer.
If these do not solve the problem, consult
your Sony dealer or service facilities.
An image is
printed with
borders even if I
select
“Borderless”.
• Are you using an software
application other than
Picture Motion Browser?
c When using an application other than the
Picture Motion Browser, an image might
be printed with Borders even if you select
Borderless Print.
If you can set Borders/Borderless with an
application, set an image to be printed
fully in the print range even if it is printed
over the range.
The print quantity
specified in “Pages
Per Sheet” on the
“Layout” tab of
the “Sony DPP-
FP65/FP75
Properties” dialog
box does not
match the actual
print quantity and
printed results.
—
c Depending on the application you are
using. the print quantity setting of the
application may have priority over the
setting specified in the printer driver
dialog box.
Colors of the
printed image
from a PC are
different from
those printed from
a memory card.
—
c Since the process used in printing an
image from a memory card differs from
that used in printing from a PC, the colors
may not be exactly identical.
Symptom Check Cause/Solutions