Filter
Top Products
User’s Manual
ECM-3711 Series User’s Manual
57
3.5.2.4 CPU L1 & L2 Cache
This item allows you to enable the CPU L1 & L2 cache to speed up memory access.
However, it depends on CPU design.
Item Description
Enabled Enable cache
Disabled Disable cache
3.5.2.5 CPU L3 Cache
This item allows you to enable the CPU L3 cache to speed up memory access.
Item Description
Enabled Enable cache
Disabled Disable cache
3.5.2.6 CPU L2 Cache ECC Checking
This item allows you to enable the CPU external L2 cache use ECC checking method in
memory access.
Item Description
Enabled Enable ECC checking
Disabled Disable ECC checking
3.5.2.7 Quick Power On Self Test
This category speeds up Power On Self Test (POST) after you power up the computer. If it
is set to Enable, BIOS will shorten or skip some check items during POST.
Item Description
Enabled Enable quick POST
Disabled Normal POST
3.5.2.8 First / Second / Third Boot Device
The BIOS attempts to load the operating system from the devices in the sequence selected
in these items.
Item Description
Floppy Floppy Device
LS120 LS120 Device
Hard Disk Hard Disk Device
CDROM CDROM Device
ZIP100 ZIP-100 Device
USB-FDD USB Floppy Device
USB-ZIP USB ZIP Device
USB-CDROM
USB CDROM Device
LAN Network Device
Disabled Disabled any boot device
3.5.2.9 Boot Other Device
This item allows you to enable the system to boot from other device.
Item Description
Enabled Enable booting from other device
Disabled Disable booting from other device
3.5.2.10 Boot Up NumLock Status
Select power on state for NumLock.
Item Description
Off Enable NumLock
On Disable NumLock